Create a 5250 Terminal Emulation Configuration

After selecting a new 5250 terminal emulation configuration, you'll need the connection specifics. At a minimum, you need the Hostname or IP address of the server, and the communications Protocol and Emulation the server requires.

There are no generic settings that will work for these options. Each is specific to a given server, as determined by the server administrator.

Connection Settings

First, enter a name for the connection. Then enter the Hostname or IP address and select the Protocol. The default Port is set to 23. On some systems, this value is different as an added security measure. In that case, you'll need to enter the correct Port as well.

Turn on Auto Connect to have this configuration connect automatically when TinyTERM starts. Only one connection configuration may have this set. Turning it on in one connection automatically turns it off in any other that may have Auto Connect set.

With Auto Reconnect on, any time this session disconnects, it will reconnect automatically.

The Prevent Disconnect switch prevents the user from disconnecting the session manually. The session only disconnects when the host sends the appropriate signal.

Terminal Settings

Select the specific 3270 Emulation required by your host system and application. Four are available:

  • IBM 5555-C01 (24 x 80 UTF-8)
  • IBM 3279-FC (27 x 132)
  • IBM 3179-2 (24 x 80)

The Pre Scan Text and Post Scan Text allow you to enter text strings to be sent to the host automatically when a scan is performed. The Pre Scan Text is sent before the scanned data, and the Post Scan Text is sent after.

Turn on Hide App Bar to prevent the application title bar from displaying at the top of the screen. A small down arrow at upper right of the emulation screen will bring it back for three seconds in this case.

Close on disconnect will cause TinyTERM to close automatically when this session is disconnected, either by the user or by the server. It overrides the Auto Reconnect switch.

The Color Settings determine the display color of the various 5250 field types on screen. Note that these are field type names, not actual colors. It's entirely possible to set "White" fields to display with blue text, for example.

Saving the Configuration

When finished, tap the back arrow to save the configuration and return to the main TinyTERM screen. Or tap the Connect button to save the configuration and connect immediately.

Once a configuration is saved, you can launch it by selecting the name from the main TinyTERM screen.

Android User Guide Table of Contents